Filter
Top Products
81
Safety and Security
Occupant safety
2 Hook
3 Anchorage ring
̈ Securely fasten the hook 2 to the an-
chorage ring 3.
2 Hook
3 Anchorage ring
̈ Swing rear seat backrest to the rear un-
til it engages.
̈ Check the rear seat backrest to be
locked in its upright position
(
୴ page 379).
Once the top tether anchorage hook is
attached, the child restraint itself can be
secured. Tighten the top tether strap ac-
cording to the child restraint manufactur-
er's instructions.
Child seat anchors - LATCH type
This vehicle is equipped with two LATCH
(L
ower Anchors and Tethers for CHildren)
type anchors (at each of the outer rear
seats) for the installation of a “LATCH”
child seat with the matching mounting fit-
tings.
The anchors are located behind an uphol-
stery blend.
i
For safety, make sure the hook 2 has
attached to the ring 3 beyond the
safety catch, as illustrated below.