Filter
Top Products
80
Safety and Security
Occupant safety
Installation of infant and child restraint
systems
This vehicle is equipped with tether an-
chorages for a top tether strap at each of
the rear seating positions.
Not foldable rear seat backrest
1 Cover
̈ Remove cover 1 from anchorage ring.
̈ Guide tether strap between head re-
straint and top of the seat back.
̈ Head restraint must be installed (if re-
movable) and positioned such that the
top tether strap can pass freely be-
tween the head restraint and the top of
the seat back.
Make sure the tether strap is not twist-
ed.
2 Hook
3 Anchorage ring
̈ Securely fasten the hook 2 to the an-
chorage ring 3.
Once the top tether anchorage hook is at-
tached, the child restraint itself can be se-
cured. Tighten the top tether strap
according to the child restraint manufac-
turer's instructions.
Foldable rear seat backrest*
̈ Fold rear seat backrest slightly for-
ward.
̈ Remove cover from anchorage ring.
̈ Guide tether strap between head re-
straint and top of the seat back.
̈ Head restraint must be positioned such
that the top tether strap can pass freely
between the head restraint and the top
of the seat back.
Make sure the tether strap is not twist-
ed.
i
For safety, make sure the hook 2 has
attached to the ring 3 beyond the
safety catch, as illustrated.