![](http://pdfasset.owneriq.net/d/97/d9747648-c280-470f-88ae-a6dbb0919a6a/d9747648-c280-470f-88ae-a6dbb0919a6a-bg7d.png)
123
Controls in detail
Memory function
Storing exterior rear view mirror park-
ing position
For easier parking, you can adjust the
passenger-side exterior rear view mirror so
that you can see the right rear wheel as
soon as you engage reverse gear R.
For information on activating the parking
position feature, see “Setting parking posi-
tion for exterior rear view mirror”
(
୴ page 160) and “Activating exterior rear
view mirror parking position”
(
୴ page 180).
1 Memory button
2 Adjustment button
3 Passenger side exterior rear view
mirror button
̈ Stop the vehicle.
̈ Switch on ignition (୴ page 36).
̈ Press button 3.
The passenger-side exterior rear view
mirror is selected.
̈ Adjust the passenger-side exterior rear
view mirror with button 2 so that you
see the rear wheel and the road curb.
̈ Press memory button 1.
̈ Within three seconds, press bottom of
adjustment button 2.
The parking position is stored if the
mirror does not move.
i
You can store a parking position for the
passenger-side exterior rear view
mirror for each SmartKey or SmartKey
with KEYLESS-GO*.
i
If the mirror does move, repeat the
above steps. After the setting is stored
you can move the mirror again.