Filter
Top Products
71
Safety and Security
Occupant safety
Installation of infant and child restraint
system
̈ Guide top tether strap between head
restraint and top of seat back. Head
restraint must be installed and posi-
tioned such that the top tether strap
can pass freely between the head re-
straint and top of seat back.
1 Hook
2 Anchorage ring
̈ Securely fasten the hook 1 to the an-
chorage ring 2.
For safety, make sure the hook has at-
tached to the ring beyond the safety
catch, as illustrated.
Vehicle without third row seats
3 Anchorage rings for second row seats
4 Anchorage rings for third row seats*
This vehicle is provided with three tether
anchorages 3 for a top tether strap be-
hind the second row seats.
Please be sure to check the indicator every
time you use the special system child seat.
Should the light go out while the restraint is
installed, please check installation. If the
light remains out, do not use the
BabySmart
TM
restraint to transport children
on the passenger seat until the system has
been repaired.
Warning! G
Do not place powered-on laptops, cell
phones and like electronic devices on the
passenger seat. Signals from such devices
may interfere with the BabySmart
TM
system.
Such signal interference may cause the
7 indicator lamp not to come on during
self-test or be continuously lit, indicating
that the system is not functioning.
!
Do not use the tether anchorages 4
for a top tether strap on a second row
seat.