Filter
Top Products
102
Controls in detail
Seats
Resetting rear seat
̈ Pull down on seat bench until it locks
into place.
̈ Pull lock button 1 (୴ page 100) up
and unfold backrest until it locks into
place.
̈ Check for secure locking by pulling and
pushing on the backrest.
The red backrest lock indicator at lock
button 1 (
୴ page 100) is not visible in
the locked position.
̈ Move the rear and front seats in de-
sired position.
̈ Pull up and adjust head restraint
(
୴ page 36).
Third row seats*
Folding down single seat
1 Head restraint
2 Hook
3 Tensioner
4 Hook and loop velcro strip
̈ Remove cargo floor plate
(
୴ page 162).
̈ Remove head restraint 1 from seat
cushion.
̈ Lift tensioner 3 upward to a horizon-
tal position to release tension of the
belt.
̈ Disengage hook 2 while holding onto
the seat firmly with one hand.
Warning! G
For your protection, drive only with properly
positioned head restraints.
Adjust head restraint so that head restraint
supports the back of the head at eye level.
This will reduce the potential for injury to the
head and neck in the event of an accident or
similar situation.
Failure to assure that seats are locked into
place could result in an increased chance of
injury in an accident.
Never place hands under seat or near any
moving parts while a seat is being adjusted.