Filter
Top Products
Black plate (27,1)
CAUTION
Always unfasten the lap portion of the
belt before folding the rear-left
seatback. Leaving the lap portion of the
belt fastened could cause damage to the
seat belt, buckle and seatback.
2. After checking that the rear seats are
clear, open the liftgate and pull the
remote handle levers on the left and
right side of the liftgate.
Remote handle lever
When using the rear seatback knobs:
CAUTION
When operating the rear seatback knob,
make sure you support the seatback
with your hand. If the seatback is not
supported with your hand, it will flip
forward suddenly and could cause
injury to the finger that pushes the rear
seatback knob down.
1. Unfasten the lap portion of the rear
center seat belt (page 2-23).
CAUTION
Always unfasten the lap portion of the
belt before folding the rear-left
seatback. Leaving the lap portion of the
belt fastened could cause damage to the
seat belt, buckle and seatback.
2. Support the seatback with your hand.
3. Push the rear seatback knob down.
Rear seatback knob
To return the seatbacks to the upright
position
1. Lift the seatbacks upright.
2. Pull on the top of the seatbacks from
inside the vehicle to make sure they are
locked.
3. Fasten the rear-center lap/shoulder belt
and check that all seat belts are routed
properly for passenger use (page 2-23).
Essential SafetyEquipment
Seats
2-13
Mazda6_8T12-EA-03K_Edition1 Page27
Friday, December 5 2003 8:53 AM
Form No.8T12-EA-03K