Filter
Top Products
Black plate (229,1)
5. Prompt:“Pa sscode is enabled. Would
you like to disable it?”
6. Say: [Beep] “Yes”
7. Prompt:“Pa sscode is disabled,
returning to main menu.”
Confirmation Prompts
The confirmation prompt confirms the
command content to the user before
advancing to the operation requested by
the user. When this function is turned on,
the system reads out the voice input
command previously received and
confirms whether the command is correct
before advancing to the command
execution.
When the confirmation prompt function is
turned on:
(Ex. “Calling John's phone. Is this
correct?”)
When the confirmation prompt function is
turned off:
(Ex. “Calling John's phone.”)
NOTE
If the confirmation prompt function is turned
off when making an emergency call, the system
reads out and confirms the command before
executing it.
1. Press the voice recognition/hands-free
switch with a short press (without
navigation system) or a long press
(with navigation system).
NOTE
For vehicles with the navigation system, you
can also press the voice recognition/hands-free
switch with a short press and say: [Beep]
“Telephone” or “Phone”.
2. Say: [Beep] “Setup”
3. Prompt:“Se lect one of the following:
pairing options, confirmation prompts,
select phone, language, or passcode...,
or say “cancel” to return to main
menu.”
4. Say: [Beep] “Confirmation prompts”
5. Prompt:“Con firmation prompts are
on/off. Would you like to turn
confirmation prompts off/on?”
6. Say: [Beep] “Yes”
7. Prompt:“Con firmation prompts are
off/on, returning to main menu.”
qVoice recognition learning
function (Speaker enrollment)
The voice recognition learning function
enables voice recognition appropriate to
the characteristics of the user's voice.
If the recognition of the voice input
commands to the system is not adequate,
this function can largely improve the
system's voice recognition of the user. If
your voice can be recognized sufficiently
without using this function, you may not
realize the added benefit of the function.
To register your voice, the voice input
command list must be read out. Read out
the list when the vehicle is parked.
Perform the registration in as quiet a place
as possible (page 6-46).
The registration must be performed
completely. The required time is a few
minutes. The user needs to be seated in
the driver's seat with the voice input
command list for voice recognition
learning open to the page indicated below.
1. Press the voice recognition/hands-free
switch with a short press (without
navigation system) or a long press
(with navigation system).
Interior Comfort
Bluetooth Hands-Free
6-61
Mazda5_8AU7-EA-09H_Edition1 Page229
Wednesday, July 8 2009 11:28 AM
Form No.8AU7-EA-09H