Filter
Top Products
Black plate (163,1)
NOTE
Because heavy ice and snow can jam the wiper
blades, the wiper motor is protected from
motor breakdown, overheating and possible
fire by a circuit breaker. This mechanism will
automatically stop operation of the blades, but
only for about 5 minutes.
If this happens, turn off the wiper switch and
park off the right-of-way, and remove the snow
and ice.
After 5 minutes, turn on the switch and the
blades should operate normally. If they do not
resume functioning, consult an Authorized
Mazda Dealer as soon as possible. Drive to
the side of the road and park off the right-of-
way. Wait until the weatherclears before trying
to drive with the wipers inoperative.
qWindshield Wipers
Type A (With INT position)
Turn the wipers on by pulling the lever
down.
INT ― Intermittent
LO ― Low speed
HI ― High speed
For a single wiping cycle, press the lever
up to MIST.
MIST ― Mist
Variable-speed intermittent wipers
Set the lever to INTand choose the
interval timing by rotating the ring.
INT ring
Type B (With AUTO position)
Turn the wipers on by pulling the lever
down.
AUTO ― Auto control
LO ― Low speed
HI ― High speed
For a single wiping cycle, press the lever
up to MIST.
MIST ― Mist
Driving YourMazda
Switches and Controls
5-55
Mazda5_8AU7-EA-09H_Edition1 Page163
Wednesday, July 8 2009 11:27 AM
Form No.8AU7-EA-09H