Filter
Top Products
Black plate (273,1)
22. Say: [Beep] “1” (Speak a number of
the desired priority from 1 to 7.)
NOTE
l
Normally, “1” is to be input (Highest
priority).
l
If more than two mobile telephones are
registered, input the priority order from 1 to
7.
23. Prompt: “XXXXXX - - - (Ex. “Stan's
phone”) (Phone tag) set to priority X
(Priority number). Is this correct?”
24. Say: [Beep] “Yes”
25. Prompt: “Pairing complete”
After a mobile telephone is registered, the
system automatically identifies the phone.
By pressing the voice recognition/hands-
free switch again, or by pressing the voice
recognition/hands-free switch first after
turning the ignition switch from the
LOCK to the ACC position, the system
reads out a voice guidance, “XXXXXX -
- - (Ex. “Stan's phone”) (Phone tag) is
connected”. If two or more telephones are
registered, the one with the highest
priority is selected.
qMaking a call using a telephone
number
1. Press the voice recognition/hands-free
switch with a short press (without
navigation system) or a long press
(with navigation system).
2. Say: [Beep] “Dial”
3. Prompt: “Number, please”
4. Say: [Beep] “XXXXXXXXXXX (Ex.
“555-1234”) (Telephone number)”
5. Prompt: “Dialing XXXXXXXXXXX
(Ex. “555-1234”) (Telephone number)
is this correct?”
6. Say: [Beep] “Yes” or “No”.
7. When “Yes” is spoken, the call is
made.
When “No” is spoken, the procedure
returns to Step 3.
qReceiving an incoming call
1. Prompt: “Incoming call, press the
phone button to answer”.
2. To accept the call, press the voice
recognition/hands-free switch with a
short press.
To reject the call, press the voice
recognition/hands-free switch with a
long press.
qHanging up a call
Press the voice recognition/hands-free
switch during the call with a long press.
Beep will confirm that call is ended.
Interior Comfort
Bluetooth Hands-Free
6-65
RX-8_8Z09-EA-08C_Edition3 Page273
Thursday, July 3 2008 2:24 PM
Form No.8Z09-EA-08C