Mazda 2009 5 Automobile User Manual


 
Black plate (214,1)
22. Say: [Beep] 1 (Call out a number of
the desired priority from 1 to 7.)
NOTE
l
Normally, 1is to be input (Highest
priority).
l
If more than two mobile telephones are
registered, input the priority order from 1 to
7.
23. Prompt: XXXXXX - - - (Ex. Stan's
phone) (Phone tag) set to priority X
(Priority number). Is this correct?
24. Say: [Beep] Yes
25. Prompt: Pairing complete
After a mobile telephone is registered, the
system automatically identifies the phone.
By pressing the voice recognition/hands-
free switch again, or by pressing the voice
recognition/hands-free switch first after
turning the ignition switch from the
LOCK to the ACC position, the system
reads out a voice guidance, XXXXXX -
- - (Ex. Stan's phone) (Phone tag) is
connected. If two or more telephones are
registered, the one with the highest
priority is selected.
qMaking a call using a telephone
number
1. Activate the Bluetooth Hands-Free
(page 6-49).
2. Say: [Beep] Dial
3. Prompt: Number, please
4. Say: [Beep] XXXXXXXXXXX (Ex.
555-1234) (Telephone number)
5. Prompt: Dialing XXXXXXXXXXX
(Ex. 555-1234) (Telephone number)
is this correct?
6. Say: [Beep] Yesor No.
7. When Yesis called out, the call is
made.
When No is called out, the procedure
returns to Step 3.
qReceiving an incoming call
1. Prompt: Incoming call, press the
phone button to answer.
2. To accept the call, press the voice
recognition/hands-free switch (Short
press).
To reject the call, press the voice
recognition/hands-free switch (Long
press).
qHanging up a call
Press the voice recognition/hands-free
switch during the call (Long press).
Beep will confirm that call is ended.
qVolume adjustment
Turn the power/volume dial of the audio
unit or navigation system to adjust the
volume.
Turn the power/volume dial to the right to
increase volume, to the left to decrease it.
Audio unit Navigation system
6-52
Interior Comfort
Bluetooth Hands-Free
Mazda5_8Z98-EA-08F_Edition1 Page214
Friday, May 30 2008 9:26 AM
Form No.8Z98-EA-08F