Filter
Top Products
Black plate (80,1)
qTransmitter Maintenance
CAUTION
Ø Make sure the battery is installed
with the correct pole facing
upward. Battery leakage could
occur if it is not installed correctly.
Ø When replacing the battery, be
careful not to bend the electrical
terminals or get oil on them. Also
be careful not to get dirt in the
transmitter as it could be
damaged.
Ø There is the danger of explosion if
the battery is not correctly
replaced.
Ø Replace only with the same type
battery.
Ø
Integrated key type: CR1620 or
equivalent
Ø
Non-key type: CR2025 or
equivalent
Ø Dispose of used batteries
according to the following
instructions.
Ø
Insulate the plus and minus
terminals of the battery using
cellophane or equivalent tape.
Ø
Never disassemble.
Ø
Never throw the battery into
fire and/or water.
Ø
Never deform or crush.
Replacing the transmitter battery
Integrated key type
1. Unfold the key (page 3-2).
2. Insert a small flathead screwdriver into
the slot and push the tab to remove the
key from the transmitter.
Tab
3. Insert a small flathead screwdriver into
the slot and gently pry open the
transmitter.
3-6
Knowing YourMazda
Doors and Locks
Mazda3_8Z87-EA-08F_Edition1 Page80
Monday, May 19 2008 9:56 AM
Form No.8Z87-EA-08F