Black plate (127,1)
3. Press the SET/- button and release it at
the speed you want. Release the
accelerator at the same time.
Don't continue to hold in the button. Until
you release it, speed will continue to drop
(unless you continue to accelerate) and
you'll miss the desired speed.
NOTE
l
The SET function can't be activated until
about 2 seconds after the ON/OFF switch
has been engaged.
l
On a steep grade, the vehicle may
momentarily slow down going up or speed
up while going down.
l
Cruise control will turn off if vehicle speed
drops below 30 km/h (19 mph) when cruise
is activated, such as when climbing a steep
grade.
qTo Increase Cruising Speed
Follow either of these procedures.
To increase speed using cruise control
switch
Press the RES/+ button and hold it. Your
vehicle will accelerate.
Release the button at the speed you want.
Your vehicle has a tap-up feature that
allows you to increase your current speed
in increments of 1.6 km/h (1 mph) by a
momentary tap of the RES/+ button.
Multiple taps will increase your vehicle
speed 1.6 km/h (1 mph) for each tap.
Driving YourMazda
Starting and Driving
5-19
Mazda5_8X53-EA-07I_Edition1 Page127
Monday, September 3 2007 10:40 AM
Form No.8X53-EA-07I