Filter
Top Products
Black plate (270,1)
Brake lights/Taillights, Rear turn signal
lights (5 Door)
1. Remove the cover.
Left side
Right side
2. Turn the socket and bulb assembly
counterclockwise and remove it.
3. Disconnect the bulb from the socket.
Brake lights/Taillights
Rear turn signal lights
4. Install the new bulb in the reverse order
of removal.
NOTE
To replace the bulb, contact an
Authorized Mazda Dealer.
Reverse light
4 Door
1. Pull the center section of the plastic
retainer and remove the retainers, then
remove the trunk rear trim.
Removal
Installation
2. Turn the socket and bulb assembly
counterclockwise and remove it.
3. Disconnect the bulb from the socket.
8-40
Maintenance andCare
Owner Maintenance
Mazda3_8T66-EA-04H_Edition1 Page270
Thursday, June 24 2004 5:20 PM
Form No.8T66-EA-04H