Filter
Top Products
Using The Transmitter To Unlock/Disarm The Security System
1. Press the button on the transmitter.
2. The horn will chirp once and parking lights will flash once indicating that the system is now
disarmed. The vehicle’s door will unlock upon arming when interfaced with the security
system.
Tamper Disarming:
If the security system has been tampered with and activated, the siren will chirp 4 times and
the parking lights will flash 3 times.
Pathway Illumination: (Optional Feature)
This feature turns ”On” the parking lights for 30 seconds upon disarming of the security
system. Arming the security system will leave the parking lights on for 10 seconds.
Two Step Door Unlocking: (Optional Feature)
This feature will independently unlock the driver’s door only when disarming the security system.
Pushing the “Unlock” button a second time within 3 seconds will unlock the entire vehicle.
Automatic Re-Arm: (Optional Feature)
If this feature is selected, the security system will automatically re-arm itself 60 seconds after
disarming with the remote transmitter. Automatic re-arm will cancel if any door is opened
before the 60 second timer has elapsed. Automatic re-arm will also re-lock the doors.
The override function may be used if the remote transmitter is lost or inoperative.
1. Enter the vehicle and turn the ignition switch to “On” position.
2. Within 10 seconds push and release the valet switch, the security system will enter the
“Emergency Override” mode. You can now start and operate the vehicle normally.
The valet switch allows you to temporarily bypass all alarm functions eliminating the need to hand
your transmitter to a parking attendant or garage mechanics. When the security system is in “Valet”
mode, all functions and remote start functions are bypassed however, the remote panic feature and
remote door locks will remain operational. To use the “Valet” mode, the security system must first be
disarmed either by using your remote transmitter or by operating the manual override sequence.
Enter Valet Mode:
1. From the disarmed condition, turn the ignition to the “On” position.
2. Push and hold valet switch for 2 seconds or until the “LED” turns on solid. The LED will
remain on as long as the system is in “Valet” mode.
Exit Valet Mode:
1. To return to normal operation, turn the ignition switch “On”.
2. Push and hold the valet switch for 2 seconds and the “LED” will turn off. This indicates the
security system is out of the “Valet” mode.
Security System Operation (continued)
5
Manual Unlock/Disarm
Valet Mode Operation
Emergency Override Operation