Filter
Top Products
4
LCD Display Transmitter Operations
Transmitter Button
System Function Remark
SET
Systems Trigger Record Check
Press within
3 Seconds
SET SET
System’s Status Check
Press within
3 Seconds
SET
Button Lock
Press within 3 Seconds and Hold
“Lock” Button for 2 seconds
SET
Optional Driving Pager
Press within
3 Seconds
SET
Monitor Interior Temperature
Press within
3 Seconds
SET
Daily Timer Start
Press within
3 Seconds
SET
LCD Screen Lamp
Turns ON for 5 Seconds
Press and Hold for 1 Second
SET-SET-SET
Clear the Flash Icon and Melody
Sound on the LCD Screen Transmitter
Button Lock:
Button Lock is useful if you want to disable the transmission function of the remote control
temporarily to prevent from any inadvertent pressing of buttons by others.
The regular remote control transmitter:
Press the button first, within 3 seconds press and hold the button for 2
seconds to activate or cancel the button lock function. The “LED” will pause flash for a few
seconds to indicate the remote control transmitter is on “Button Lock” mode while pressing
the transmitter button.
The 2-Way remote control transmitter:
Press the SET button first, within 3 seconds press and hold the button for 2
seconds to activate or cancel the button lock function.
Note: The icon will display on the LCD screen to show the remote transmitter is in “Button
Lock” mode.
Chirp Indicators
-
-
-
-
-
-
-
=
=
=
=
Chirp Function
1 Chirp System is Armed
2 Chirps System is Disarmed
3 Chirps Defective Reminder
4 Chirps Disarm / Triggered
6 Chirps Car Locator
M12A-UM 5/23/06 12:43 PM Page 4