Filter
Top Products
Vibration/Melody Mode: This mode is useful when you are in a noisy place and it is difficult to hear
the beep from the remote. The LCD transmitter will vibrate if your security system has been
activated.
Press the “SET” button first, within 3 seconds press the ( ) button for 2 seconds to select the
mode of vibrate/melody. The icon will be displayed on the LCD screen to show mode.
Set-Up Fixed Count Down Timer:
Press the “SET” button first, then within 3 seconds press and hold the button for 2 seconds.
The LCD screen will show the icon and timer (0:10). Press the button again to choose the
desired time.
Out of Range Indication:
1. If the transmitter is within range, the icon will display on the LCD screen.
2. If you are out of range, the icon will disappear from LCD Screen and transmitter will beep
5 times.
Timer Setting
Programming the LCD Transmitter
17
Button Description Operation
Press and Hold SET
Button for 3 seconds
Time Setting (Hour)
Flash Digit for Adjusting
for (-) and (+)
Press the SET
Button Once
Time Setting (Min.)
Flash Digit for Adjusting
for (-) and (+)
Press the SET
Button Once
Alert Alarm Time Setting (Hour) Flash
Digit for Adjusting
for (-) and (+)
Press the SET
Button Once
Alert Alarm Time Setting (Min.) Flash
Digit for Adjusting
for (-) and (+)
Press the SET
Button Once
Alert Alarm Setting ON/OFF for (-) and (+)
Press the SET
Button Once
Count Down Timer Setting (Hour) Flash
Digit for Adjusting
(Max 19 Hrs. 59 Min.)
for (-) and (+)
Press the SET
Button Once
Count Down Timer Setting (Min.) Flash
Digit for Adjusting
for (-) and (+)
Press the SET
Button Once
Count Down Timer Setting ON/OFF for (OFF) and (ON)
Press and Hold
button for 2 seconds
Daily Timer Start Timer Setting
Flash / Icon and hours for Adjusting
for (-) and (+)
M12A-UM 5/23/06 12:43 PM Page 17