Filter
Top Products
16
Step 2: If the 750M is not on, verify that the slide switch on the Battery Charger is in the
‘AUTO’ position then press POWER and allow the system to power up.
Step 3: Select desired user and press ENTER to arrive at ‘Select Destination’ screen (Main
Menu).
Step 4: Press OPTION to arrive at ‘User Options’ screen.
Step 5: Select the ‘Diagnostics’ icon, press ENTER.
Step 6: Scroll to ‘Sensor Status’, press ENTER.
Step 7: Vehicles with automatic transmission, place foot firmly on the brake and put vehicle
into drive. If using manual transmission, place foot firmly on brake and keep transmission in
neutral.
Step 8: Wait for the vehicle to be motionless and verify that
there is a green ZMD (zero motion detected) displayed on
the right center side of the screen.
Step 9: Press LOCATE. ‘Computing new ZMD threshold’
will appear on bottom of Display screen.
Step 10: Wait for ‘Computing new ZMD threshold’ to
disappear (approximately 10 seconds).
Step 11: Accelerate to 10-15 miles per hour, then stop.
The ZMD indicator disappears when the 750M detects motion.
Step 12: While stopped, wait for the ZMD indicator to reappear. Now repeat the acceleration
and stop process four more times.
For verification, the Bias LC and Orientation LC (Learn Count) numbers must
increment as the system calibrates to the vehicle.If this is not true,refer to the
‘Troubleshooting’section.
TIP
TIP
TIP
TIP