Filter
Top Products
10
INSTALLATION
Step 1: Place Carry Case in Vehicle
While the preferred placement of the Carry Case depends on the vehicle being driven, AL
WAYS
place case:
• On a vehicle floor or seat that allows easy driver accessibility and optimal passenger
comfort;
• With its Air Vent side up and with its handle facing the front of the vehicle;
• In the SAME orientation each time the system is used;
• In a location where movement will be eliminated while driving;
• In a location that minimizes stress on cables.
Please refer to the examples below.
Step 2: Connect Power Adapter to Vehicle
a) Unzip case compartment containing the Display
b) Take out the Power Adapter
c) Connect to the vehicle accessory power port
d) Ensure that the Battery Charger is in the ‘AUTO’ position
e) Verify that all connections to the Docking Station, Battery and Battery Charger are secure.
Correct Correct Incorrect
!
The 750M Carry Case is equipped with Air Vents that deliver air
circulation to the Navigation Computer. Failure to keep Air Vents
free of airflow obstructions could cause permanent damage to
the 750M system.