Filter
Top Products
21
Install the gimbal bracket. Orient the bracket so the arms slope to-
ward the front of your unit.
Attach the unit to the gimbal bracket using the supplied gimbal knobs
and washers. Slide the rubber washers onto the gimbal knobs then
loosely screw the knobs into their sockets. Slide the unit into the
bracket with the rubber washers to the outside of the bracket arms.
Tilt the unit to the desired viewing angle and tighten the knobs finger
tight.
Portable Installation
Like many Lowrance products, this sonar unit is capable of portable
operation by using an optional portable power pack. The power pack
and an optional portable transducer expand the uses of your sonar
unit. The power pack makes it easy to use the unit on your boat or take
it to the dock, on a float tube, on an ice fishing trip or as a second sonar
in a friend's boat. The portable power pack can be used with eight "D"
cell alkaline batteries or an optional sealed, rechargeable battery. For
set-up directions, refer to the pack's instruction sheet.
Front