Filter
Top Products
menu
page appears,
then
press
the
key adjacent
to the "REMOVE ZOOM
BAR"
label.
Note:
Turning
the zoom bar on also turns
the zoom feature on.
DISPLAY
ZONE BAR
When
the zone alarm is
on,
the zone bar doesn't
normally
show on the
screen. To turn
the zone bar on
continuously,
first
press
the MENU
key
until the 3rd menu
page appears.
Now
pressthe keynexttothe
"DISPLAY
ZONE BAR"
label.
To turn the zone bar
off,
press
the
MENU
key
until the third menu
page
appears,
then
press
the
key adjacent
to the "REMOVE ZONE BAR" label.
Note:
Turning
the zone bar on also
turns the zone alarm on.
DIGITAL
SONAR
When the
X-55 is turned on for the
first
time,
the
digital depth display
is
located
at the
top
left corner of the screen.
This
display
comes from a
separate
digital
sonar built into the unit. It
displays
only
the bottom
depth.
If it loses
the
bottom,
the last known
depth
will
flash on the
display.
When
the
digital
finds the
bottom,
it will
automatically
display
the bottom
depth
again.
The
digital
sonar can be turned
off,
however this also turns all automatic
features off
also,
such as auto
sensitivity,
auto
ranging,
and the
Fish I.D.
feature.
To turn the
digital
sonar
off,
press
the Menu
key
three times. Now
press
the
key adjacent
to the "TURN
DIGITAL SONAR OFF" label. To turn
it
back on
again, repeat
the same
steps.
MENU
-
PAGE 4
FAST R A K
This feature
converts all ech-
oesto short horizontal
lines on
the
display's
far
right
side. The
graph
continues
to
operate
normally.
FASTRAK
gives you
a
rapid update
of conditions
directly
under the boat.
This
makes it useful for ice
fishing,
or when
you're fishing
at an-
24
Pressing
the
key adjacent
to
the "2X/4X" label
enlarges
ech-
oes from two times
to four
times their normal size.
To switch
between the
split
screen
zoom and full screen
zoom, press
the
key adjacent
tothe"SPLIT/FULL"
label. The
screen
instantly
splits
into two
sections as shown
at left. All
targets
on the left are shown atfourtimes
the size of the
ones on the
right.
If
you
switch to the 2X zoom
mode,
echoes on the left side
of the screen
are
shown attwice the size as the
ones on the
right.
The echoes
that scroll
across
the screen are the
exact same echoes on both sides
of the screen.
They're
simply enlarged
on the
left side. This feature tracks
the
bottom,
keeping
it on the
display
at all
times,
when
the automatic feature
is
on.
Once
you've
set
the zoom as
desired,
press
the CLEAR
key
to erase the
menus.
ZOOM
-
MANUAL
MODE
When
you press
the
zoom
key
while the unit is
in the manual
mode,
the
screen shown below
appears.
All of the menus on
this screen work
identically
as described
above.
However,
one additional
menu item is
shown when the unit is
in the manual mode: "ADJUST".
To
adjust
the
zoom,
press
the
key
adjacent
to the
"ADJUST' label. A
screen similar to the one below
appears.
A zoom bar and
adjust
arrows
appear
on the screen. The echoes
on the left side of
the screen are the
ones that
appear
between the
top
and the bottom of the zoom
bar. Press
the
up
or down arrow
keys
to
ove the
zoom bar
up
or down.
As
you
adjust
the zoom
bar,
the echoes
move on the left
side of the screen
at the same
time.
The zoom
adjust
menus
will
automatically
clear a few
seconds
after
you've pressed
the last
key.
Remember,
the X-
55 won'ttrackthe
bottom when
it's in the
manual mode.
13
PDF compression, OCR, web-optimization with CVISION's PdfCompressor