Filter
Top Products
28
Selecting Adjust Antenna Park will place a dialog box in the upper
right-hand corner of the screen. Use Arrow keys to adjust it.
To adjust Antenna Park:
1. Make sure the vessel is not moving, then, from the Radar Setup
menu, press →|↓ to
ADJUST ANTENNA PARK and press ENT. That will dis-
play the Adjust Antenna Park dialog box in the upper right-hand cor-
ner of the screen.
2. Use ← → to input the desired setting.
3. Test your settings by putting the radar into STANDBY Mode. Ob-
serve the location where the antenna stops. Repeat the steps above un-
til the desired location is achieved. Press
EXIT to return to the main
page display.
Remember; you must not be moving when attempting to adjust Antenna
Park settings. Your vessel must be stationary for the antenna to stop in
the desired position. If you attempt to adjust Antenna Park while the
vessel is underway or if the antenna stops in the desired position and
you begin moving, the wind will move the antenna out of position.
Radar Information
Displays information about the radar, like radar model, radar status
and software information.
To access radar information:
1. Select RADAR INFORMATION on the radar menu, then press ENT.