Filter
Top Products
91
Settings
Route
Allows you to select a route to be used
during a simulation.
To select a route:
1. Select Route from the Advanced menu and press ENTER. A Route
List will appear.
Use the keypad to select the desired route and press2. ENTER.
Set Start Position
Sets the starting point of a GPS Simulation to the cursor position.
To set start position:
Highlight the 1. Set Start Position button on the Advanced menu and
press ENTER.
Select the 2. Set button and press ENTER.
Highlight 3. OK and press ENTER.
Restore Defaults
Switches Advanced simulator options back to defaults settings. To restore defaults,
select Restore Defaults from the Advanced menu and press ENTER.