Filter
Top Products
20
21
Chart Operation | Elite-5m HD
Chart Operation | Elite-5m HD
Navigating a trail
A trail must be saved as a route before it can be
navigated.
To save a trail as a route:
1. Highlight the desired trail on the Trails
screen and press ENTER. The Edit
Trail menu will appear.
2. Highlight Create Route and press
ENTER. The Edit Route menu will
appear.
3. Highlight Done and press ENTER.
4. For navigation instructions refer to the
“Navigating a route” segment.
Displayed and Record
Displayed allows you to show/hide trails on the
map display, preventing the screen from being
cluttered with trails.
The Record command allows you to record or
resume recording a desired trail.
Delete and Delete All
Delete is used to remove
individual trails. Delete
All removes all trails.
Orientation
Allows you to select North Up or Course Over
Ground (COG) as the map orientation.