Filter
Top Products
8
9
Basic Operation | Elite-5m HD
Basic Operation | Elite-5m HD
Standby mode
Lowers power consumption by turning o the
display.
1. Press the PWR/LIGHT
key to access the Back-
light dialog.
2. Select Standby and
press ENTER.
3. Press any key to resume normal
operation.
Restore defaults
Sets unit options and settings to default values.
Goto cursor
Used to navigate to the cursor.
1. Move the cursor to a desired location
and press MENU.
2. Select Goto cursor and press ENTER.
Advanced Mode
Enables advanced features and settings.
The following features are enabled when Advanced
mode is turned on:
• Navigation (Enables arrival radius, off-
course distance and Bearings setting)
• Alarms (Enables arrival, off course and
anchor alarm options)
• NMEA 0183 conguration options
• Units (Enables distance, speed and
bearings conguration options)
NOTE: Leaving your unit in Standby
mode when your motor is turned o will
run down your battery.