Filter
Top Products
71
map feature or Point of Interest. When the feature has been selected,
press
ENT. Now choose the reference point by its name or by simply se-
lect the one nearest your location and press
ENT. Choose your reference
point from the list then press
ENT|ENT, which will take you back to the
project waypoint screen.
4. Press
↓ to DISTANCE|ENT. Press ↑ or ↓ to change the first character,
then press
→ to the next character and repeat until the distance is cor-
rect. Press
ENT.
5. Press
↓ to BEARING|ENT. Press ↑ or ↓ to change the first character,
then press
→ to the next character and repeat until the bearing is cor-
rect. Press
ENT.
6. Press
↑ to PROJECT|ENT. The Edit Waypoint menu appears. You can
simply save the new projected waypoint by pressing
EXIT|EXIT or you
can edit the waypoint. (Press
EXIT|ENT if you want to immediately be-
gin navigating to the new waypoint.)