Filter
Top Products
To replace the battery:
Integrated Keyhead Transmitter
1. Twist a thin coin in the slot near
the key ring to remove the battery
cover.
2. Do not wipe off any grease on the
battery terminals on the back
surface of the circuit board.
3. Remove the old battery.
Note: Please refer to local
regulations when disposing of
transmitter batteries.
4. Insert the new battery. Refer to
the instructions inside the IKT for the correct orientation of the battery.
Press the battery down to ensure that the battery is fully seated in the
battery housing cavity.
5. Snap the battery cover back onto the key.
Intelligent Access Key
1. Remove the backup key from the
transmitter, then twist a thin coin in
the slot hidden behind the backup
key slot to remove the battery
cover.
2009 MKS (mks)
Owners Guide (post-2002-fmt)
USA (fus)
Locks and Security
107