Filter
Top Products
Technical specifications:
Type
321xxx+00xxx4xx
322xxx+00xxx4xx
322xxx+40xxx4xx
32Kxxx+x0xxx4xx
32Kxxx+10xxx4xx
32Kxxx+30xxx4xx
328xxF+x0xxx4xx
32Kxxx+30xxx3xx
(2000N)
4.5
9.5
(7500N)
#
#
(2000N)
13.6/8.5
15/6.5
(7500N)
3000
3000
3000
Push
7500
P
= Stroke lengths where potentiometer is possible as standard
* LINAK control boxes are designed so that they will short-circuit the motor terminals (poles) of the actuator(s) when the actuator(s) are not
running. This solution gives the actuator(s) a higher self-locking ability. If the actuator(s) are not connected to a LINAK control box the termi-
nals of the motor must be short-circuited to achieve the above mentioned self-locking ability.
# = Not with spindle potentiometer (stroke length max. 220 mm)
K = Ball screw
KAS = Ball screw with safety nut
KSM = Ball screw with splines and safety nut
R = Reed-switch
F = Manual quick release
FH = Manual quick release with dampened movement
KAS and KSM are only available on LA32K (with ball screw)
The above measurements are made in connection with a CB12, the LA32JKSM with a CBJ1 high speed.
Graphs:
LA32 current v´s load
0
0,5
1
1,5
2
2,5
3
3,5
4
4,5
5
0 1000 2000 3000 4000 5000 6000
Thrust (Nm)
Amp.
6mm pitch
5mm pitch
3mm pitch
Ball screw
Thrust (N)
LA32 speed v´s load
0
2
4
6
8
10
12
14
16
0123456
Thrust KN
Speed (mm/s)
3mm pitch
Ball screw
6mm pitch
5mm pitch
Thrust (N)
1000 2000 3000 4000 5000 6000
Measurements are made in connection with a CB12
Terms of use
The user is responsible for determining the suitability of LINAK products for specifi c application.
LINAK takes great care in providing accurate and up-to-date information on its products.
However, due to continuous development in order to improve its products, LINAK products are
subject to frequent modifi cations and changes without prior notice. Therefore, LINAK cannot
guarantee the correct and actual status of said information on its products.
While LINAK uses its best efforts to fulfi l orders, LINAK cannot, for the same reasons as
mentioned above, guarantee the availability of any particular product. Therefore, LINAK reserves
the right to discontinue the sale of any product displayed on its website or listed in its catalogues
or other written material drawn up by LINAK.
All sales are subject to the Standard Terms of Sale and Delivery for LINAK. For a copy hereof,
please contact LINAK.
Copyright ® LINAK 2010.03 . MA M9-02-060-N . Chapter 5.9