Filter
Top Products
78
Remove the 3 screws [1], lift the tank approx. 15 mm and carefully tilt to the side. Disconnect
the fuel lines, disconnect the connector for the fuel pump and the pickup cable (fuel level)
and set down the tank.
Remove the lower screw [2] on the right tank. Remove the HH screws and take off the bat-
tery cover [3].
Remove the drain plug [4] on the oil tank and allow the oil to drain into a receptacle. Remove
the screws [5] and tilt the oil return valve [6] to the side.
1
1
1
2
3
5
6
4
5
MAINTENANCE WORK ON CHASSIS AND ENGINE »