Filter
Top Products
Removing and remounting the seat
Insert the ignition key in the seat lock and turn in a counterclockwise direction to unlock
the seat. Lift the back of the seat and pull off towards the rear.
To remount, fit the nose [1] of the seat in the front, lower the back while pushing towards
the front. Both noses [2] should fit into the frame. Insert the catch bolts [3] in the lock hous-
ing and push the seat down in the back until you hear the catch bolts snap into place.
Check whether the seat is correctly mounted.
If not correctly mounted, the seat can slip while you are driving and cause you to lose con-
trol of your motorcycle.
Tool set
The tool set [4] and an extension piece [5] for some of the wrenches in the tool set are
located in the pocket under the seat.
The 990 Adventure S model (without ABS) has an additional storage compartment under
the cover [6].
MAINTENANCE WORK ON CHASSIS AND ENGINE »
41
4
1
2
3
5
6