Filter
Top Products
TECHNICAL DATA - ENGINE TIGHTENING TORQUES 91
Screw, cylinder head M10x1,25 Tightening sequence:
Tighten diagonally, begin-
ning with the rear screw on
the chain shaft.
Step 1
10bNm (7.4blbfbft)
Step 2
30bNm (22.1blbfbft)
Step 3
50bNm (36.9blbfbft)
Engine oil (any)
Gear oil drain plug with magnet M12x1,5 20bNm (14.8blbfbft) ದ
Ignition rotor nut M12x1 60bNm (44.3blbfbft) ದ
Plug, SLS M12x1,5 20bNm (14.8blbfbft) ದ
Oil pressure control valve plug M12x1,5 20bNm (14.8blbfbft) ದ
Spark plug M12x1,25 15… 20bNm (11.1…
14.8blbfbft)
ದ
Plug, rocker arm M14x1,25 20bNm (14.8blbfbft) ದ
Plug, gear oil screen M16x1,5 20bNm (14.8blbfbft) ದ
Plug, engine oil screen M17x1,5 20bNm (14.8blbfbft) ದ
Nut, inner clutch hub M18x1,5 80bNm (59blbfbft) ದ
Nut, primary gear M20LHx1,5 150bNm
(110.6blbfbft) Loctite
®
648™
Plug, timing chain tensioner M24x1,5 25bNm (18.4blbfbft) ದ