Filter
Top Products
KPA-H2C Installation Guide
5
KPA-H2C Installation Guide
4
Installation in a vehicle (continued)
5. Plug the cigarette lighter adapter
into the back of the cradle, as
shown. Don’t plug the adapter into
the cigarette lighter until the instal-
lation is completed.
6A. Plug the cassette adapter
into the back of the cradle,
as shown.
6B. If your car stereo has an aux input,
plug the supplied audio cable into
the back of the cradle instead of the
cassette adapter. Plug the audio
cable’s white (L ch,) and red (R ch.)
connectors into your car stereo.
Installation in a vehicle
Note: Do not put Here
2
Anywhere in the docking station until you have completed the installation.
4. Using the provided screw,
assemble the docking station
cradle to the base.
2. The leaves on the base can be bent to con-
form to curved mounting surfaces.
3. Peel the covering away from the adhesive on
the bottom of the base and adhere it to the
mounting surface. Use the provided screws
to securely attach the base to the surface.
• If using screws, be sure that you do not
damage wiring or other systems on the
other side of the mounting surface.
1. Determine where you want to mount
Here
2
Anywhere.
• Do not install Here
2
Anywhere
where it may obstruct your view
through the windshield or your view
of your vehicle’s indicator displays.
• Do not install Here
2
Anywhere
where it will hinder your access to
the vehicle’s controls.
• Do not install Here
2
Anywhere
where it may hinder the function of
safety devices such as an airbag.
Doing so may prevent the air-bag
from functioning properly in the
event of an accident.
• Find a location that provides good
visibility of and access to
Here
2
Anywhere’s front panel.
• Kenwood strongly recommends
that you mount Here
2
Anywhere in a
location where the base can be
attached with the provided screws.