Filter
Top Products
English 65
Load the image6
1
1
1
1 Rotates the image.
⁄
See • <About Picture files> (page 6) for readable image
specifications.
The [Memory] button on the “Background” screen •
becomes active only in STANDBY source mode.
Pressing the [Memory] button on the “Background” •
screen switches the AV OUT source to OFF.
For resetting the AV OUT source, refer to <AV Interface
Setup> section.
While loading the Background image, any other •
operation is prohibited.
Background Change
Selects a image for background.
Select Background Change screen1
Select a image for background2
1
1
1
1 Returns to the initial background.
Set the image as the background3
Panel Color Coordinate
Sets the button illumination color.
Display the Color screen1
Touch [
]
>
[ ]
>
[Display]
>
[Color].
(page 59)
Display the Panel Color Coordinate screen2
[Initialize] Initialization resets the settings
made using the Panel Color to the default
settings made at the factory.
[Panel Color Scan] When set to "ON", the
illumination color of the buttons changes one
after another.
⁄
When touching [SET] or [Initialize], make sure [Panel •
Color Scan] is set to "OFF".
Select a color3
1
1
1
1 Sets to the touched color.
[Adjust] Sets and registers favorite color to the
preset buttons ([P1] – [P3]).
Next page 3