Kenwood DNX5190 GPS Receiver User Manual


 
9
DNX7190HD/DNX7490BT/DNX6990HD/DNX6190HD/DNX6490BT/DNX5190/DNX5060EX
Number Name Motion
1
(Reset) •If the unit or the connected unit fails to operate properly, the unit returns
to factory settings when this button is pressed (Instruction Manual
P.111).
•If the SI function is turned on, this indicator flashes when the vehicle
ignition is off (Instruction Manual P.84).
2
ATT •Switches attenuation of the volume on/off.
•North America Sales area: Pressing for 1 second stores the tag data of
the current music from HD Radio tuner or SiriusXM (Instruction Manual
P.60).
•Central and South America sales area: Pressing for 1 second turns the
screen off.
3
, 5 (Vol) Adjusts volume.
4
AUD •Displays Graphic Equalizer screen (Instruction Manual P.99).*
•Pressing for 1 second switches camera view display on/off.
5
NAV •Displays the navigation screen.
•Pressing for 1 second switches AV out sources.
6
MENU •Displays the Top Menu screen (Instruction Manual P.14).
•Pressing for 1 second turns the power off.
•When the power off, turns the power on.
7
TEL •Displays the Hands Free screen (Instruction Manual P.68).
•Pressing for 1 second displays the Screen Control screen.
8
0 (Eject) •Ejects the disc.
•When the panel is opened, pressing closes the panel and pressing for 1
second ejects the disc forcibly.
•When the panel is closed, pressing for 1 second fully opens the panel to
the location of the SD card slot.
9
Remote
Sensor
Receives the remote control signal.
10
Disc insert
slot
A slot to insert a disc media.
11
SD card slot An SD card slot for upgrading the map. For how to upgrade the map, refer
to the instruction manual of the navigation system.
* The display may not switch to the Graphic Equalizer screen in some conditions.