Kenwood DNX5190 GPS Receiver User Manual


 
11
DNX7190HD/DNX7490BT/DNX6990HD/DNX6190HD/DNX6490BT/DNX5190/DNX5060EX
Number Name Motion
1
(Reset) •If the unit or the connected unit fails to operate properly, the unit returns
to factory settings when this button is pressed (Instruction Manual
P.111).
•If the SI function is turned on, this indicator flashes when the vehicle
ignition is off (Instruction Manual P.84).
2
MENU •Displays the Top Menu screen (Instruction Manual P.14).
•Pressing for 1 second turns the power off.
•When the power off, turns the power on.
3
NAV •Displays the navigation screen.
•Pressing for 1 second switches AV out sources.
4
TEL •Displays the Hands Free screen (Instruction Manual P.68).
•North America Sales area: Pressing for 1 second stores the tag data of
the current music from HD Radio tuner or SiriusXM (Instruction Manual
P.60).
•Central and South America sales area: Pressing for 1 second turns off the
display.
5
Volume Knob •Pressing switches attenuation of the volume on/off.
•Turning adjusts volume up or down.
•Pressing for 1 second displays Tone Control screen (Instruction Manual
P.99).*
6
SCRN •Displays the Screen Control screen.
•Pressing for 1 second displays rear view camera display.
7
Remote
Sensor
Receives the remote control signal.
You can enable or disable this feature by Remote Sensor (Instruction
Manual P.83).
8
0 (Eject) •Ejects the disc.
•Pressing for 1 second ejects the disc forcibly.
9
Disc insert
slot
A slot to insert a disc media.
10
MicroSD
card slot
A microSD card slot for upgrading the map. For how to upgrade the map,
refer to the instruction manual of the navigation system.
* The display may not switch to the Tone Control screen in some conditions.