Kenwood DDX896 GPS Receiver User Manual


 
DDX series DDX896/ DDX8046BT
English
37
Next page 3
Radio Listening
Source Control Screen Source Control Screen
Switches to the source control screen to
use various functions.
1 Display the Source Control Screen
See <How to Display the Source Control
Screen> (page 18).
2 Operation on the Source Control
screen
1
1
1
2
2
2
[FM] Switches to the FM1/2/3 band.
[AM] Switches to the AM band.
[TI] Turns the Traffic Information
function On or Off.
See <Traffic Information> (page 40).
[4],[¢] Tunes in a station.
Use the [SEEK] to change the frequency
switching.
2 Display the Tuner Preset List Screen.
See <Preset Select> (page 38).
1 Information display
FMFM
Selects the Program Service
Name, Title & Artist name, Station
name, Radio Text plus, or Radio Text.
"FM"/ "AM" Band display
"Preset" Preset number
"MHz"/ "kHz" Frequency display
[
] When appears, the text display
is scrolled by touching it.
Various control screens appear in the Tuner Source mode.
Set the remote controller mode switch to "AUD" mode before starting operation, see <Remote Controller
mode switch> (page 105).
Multi Function
[1/2] Switches the multi function
display.
[
] Closes the multi function bar.
[P1] – [P6] When [P1] to [P6] buttons
appear, you can recall the stations on
memory.
For memory of broadcasting stations,
see <Auto Memory> (page 38) or
<Manual Memory> (page 39).
[SEEK] Switches the Seek mode.
The mode is switched in the following
order each time you touch the button.
Display Setting
"AUTO1" Tunes in a station with good reception
automatically.
"AUTO2" Tunes in stations in memory one after
another.
"MANU" Switches to the next frequency manually.
[AME] Selects the Auto Memory mode.
See <Auto Memory> (page 38).
[PTY]
FMFM
Searches station by
program type. See <Search by Program
Type> (page 40).
[INFO]
FMFM
Displays Radio Text
screen. See <Radio Text> (page 39).
[4Line]/[2Line]
FMFM
Switches
the number of lines displayed in the
Information Display.