Kenwood DDX8032BT GPS Receiver User Manual


 
English 93
• You may not set some models of power amp boost to
"+18". See the catalog or instruction manual of power
amplifier.
Equalizer Control
You can setup the equalizer.
1 Display Equalizer Control
Touch
in the "Audio
Control Menu" screen (page 92).
2 Display the Equalizer screen
1
3
2
1
1 Selects an equalizer curve type.
You can select any of the following
equalizer curves.
"NATURAL"
"ROCK"
"POPS"
"EASY"
"TOP40"
"JAZZ"
"USER"
• Equalizer curve can be set for each source.
2 Displays the Graphic Equalizer setup screen.
(page 93)
3 Returns to the "Audio Control Menu" screen.
Graphic Equalizer Setup
You can Manually set the equalizer curve.
1 Display the Parametric Equalizer screen
3
5
5
4
6
2
4
1
1 Select a channel to be adjusted.
2 Tone curve becomes flat.
3 Returns to the previous level which the gain
level is adjusted.
4 Sets a frequency.
5 Sets a gain level.
6 Exits the Graphic Equalizer setup and
returns to the "Equalizer" screen.
• Gain level can be adjusted by touching the each
frequency bar.