Kenwood DDX8032BT GPS Receiver User Manual


 
44 DNX8120/DDX812/DDX8032BT
Functions While Displaying the Control
Screen
Switches to control screen to use various
functions.
5
6
7
4
8
9
2
3
5
10
12
1
11
13
14
15
16 17
1 Band display
2 Preset number
3 Channel display
4 Displays information concerning music
being played.
Sirius : Changes the display from Channel
Name, Song Title Name, Artist Name,
Composer Name, to Category Name.
Various control screens appear in the Satellite radio source mode. (with the optional accessory Satellite
radio connected only. To connect the Sirius tuner, a conversion cable CA-SR20V (optional accessory) is
necessary and to connect the XM tuner, an XM interface Box KCA-XM100V (optional accessory) is necessary.)
This document uses the SIRIUS display as an example.
XM : Changes the display from Channel
Name, Song Title Name, to Category
Name.
Displays the ID number when Channel 0 is
selected.
Sirius : Displays the SIRIUS ID.
XM : Displays the RADIO ID.
5 Tunes in a station.
6 Switches the band.
7 Switches the button display.
8 Starts or stops Channel Scan (that tunes
channels one after the other).
9 Switches the Seek mode.
SEEK 1: Tunes channels one after the other.
SEEK 2: Selects channels in memory one
after the other.
p Switches the number of lines displayed in
the Information Display.
q Displays the Hands Free screen. (page 52)
w Indicates current Seek mode
e When
P1
to
P6
buttons appear, you
can recall the channel on memory. For
memory of channel stations, see <Channel
Memory> (page 45) .
r You can tune in by entering the desired
channel number. See <Direct Channel
Search> (page 46)
t You can tune in by specifying the desired
category. See <Channel Search> (page 45)
y Displays the program information screen.
u Displays the external device control
screen. See <External Device Power Supply
Control> (page 48).
SIRIUS/XM Control (North American sales area only)