Kenwood DDX6034 GPS Receiver User Manual


 
72 DNX7340BT/DNX7340BTM/DDX7034BT/DDX7034BTM/DDX6034/DDX6034M
Setup Menu
Speaker Setup
You can select a speaker type and its size to get
the best sound effects.
Display the Speaker Select screen1
Touch [ ] > [ ] > [Audio SETUP] >
[Speaker Select]. (page 58)
Select a speaker you wish to adjust2
When the speaker type and size are set, the
speaker crossover network and equalizer curve
are set automatically.
DNX/ DDX7 models
2
2
2
1
1
1
3
3
3
DDX6 models
2
2
2
1
1
1
3
3
3
1
Front speaker
2
Rear speaker
3
Subwoofer
[Subwoofer] Sets the availability of
subwoofers. (DDX6 models only)
[Tweeter] You can set the tweeter when you
are selecting front speakers. (DNX/DDX7
models only)
If you are using a tweeter together with the
front speakers, set the tweeter to "ON". In the
"ON" position, the Equalizer is adjusted to its
best position.
[X'over] Displays the Speaker Crossover Setup
screen.
You can adjust the crossover setup that was
set automatically when you selected the
speaker type.
Select a speaker type3
You can select any of the following speaker
types.
DNX/ DDX7 models
"Front" OEM, 10 cm, 13 cm, 16 cm, 17 cm, 18
cm, 4x6, 5x7, 6x8, 6x9, 7x10
"Rear" NONE, OEM, 10 cm, 13 cm, 16 cm, 17
cm, 18 cm, 4x6, 5x7, 6x8, 6x9, 7x10
"Subwoofer" NONE, 16 cm, 20 cm, 25 cm, 30
cm, 38 cm over
DDX6 models
Standard, Narrow, Middle, Wide
Select "NONE" if you have no speakers.
Crossover Network Setup
You can set a crossover frequency of speakers.
Select the speaker to set the crossover1
2
2
2
1
1
1
3
3
3
1 Sets the High Pass Filter of the front speaker.
2 Sets the High Pass Filter of the rear speaker.
3 Sets the Low Pass Filter of the sub woofer.
Display the Crossover setup screen2
Set the crossover3