Kawasaki R8126 Motorized Toy Car User Manual


 
12
IMPORTANT! Use only a Power Wheels
®
12 volt lead-acid
rechargeable battery. Use of any other battery will damage your
vehicle. Make sure that you charge the battery for at least 18 hours
using the enclosed Power Wheels
®
12 volt charger before operating
your vehicle for the first time. Charge the battery for at least
14 hours after each use of the vehicle. Never charge the battery
longer than 30 hours. Failure to follow these instructions may
damage your battery and will void your warranty.
Press the tab on the rear of the seat and lift to remove.
Tab
Plug the motor harness connector into the battery.
Power Wheels
®
12 Volt Battery
Motor Harness
Connector
Carefully lower the battery into the battery compartment.
The battery retainer slides over the battery to secure it.
BATTERY INSTALLATION
1
2
3
Seat
Battery Retainer
Rear Tab B
Front Tab A
R8126a-0920
First, insert the tab on the front of the seat into the slot toward the
front end of the vehicle A .
Then, insert and “snap” the tab on the rear of the seat into the slot
in the rear of the vehicle B.
4