Filter
Top Products
11
• Before applying the labels, wipe the surface of the vehicle with
a clean, dry cloth to remove any dust or oils.
• Place the labels exactly as shown in the illustrations. For best
results, avoid repositioning a label once it has been applied to
the vehicle.
• After applying a label, rub the label firmly with a clean, dry cloth to
make sure the label is adhered to your vehicle. Start at the center of
a label, and smooth towards the outer edges to remove air bubbles.
DECORATION
LEFT SIDE VIEW
RIGHT SIDE VIEW
BACK VIEW
3
8
6
1
8
2
4
5
7
2
• First, insert the tab on the front of the seat into the slot toward the
front end of the vehicle A .
• Then, insert and “snap” the tab on the rear of the seat into the slot
in the rear of the vehicle B.
• "Snap" the shovel onto the back of the vehicle, as shown.
Rear Tab B
Shovel
Front Tab A
LEFT SIDE VIEW
14
15
SIDE VIEW
R8126a-0920