Filter
Top Products
Washer
Rear Wheel
Driver
Cap Nut
Cap Nut
Assembly Tool
Hubcap
• Slide a washer onto the rear axle.
• Slide the rear wheel driver onto the rear axle. Make
sure the rear wheel driver fits onto the pins in the
motor assembly.
• Slide a wheel onto the rear axle. Make sure the ribs on
the wheel fit into the grooves on the rear wheel driver.
• Slide a hubcap, indented side out, onto the rear axle.
• Fit a .437 cap nut on the end of the rear axle.
• Fit the cupped end of the cap nut assembly tool over
the cap nut and tap the end of the cap nut assembly
tool with a hammer to secure the cap nut on the end of
the rear axle.
Assembly
10
4
Motor Assembly
Rear
Axle
.437"
.437 Cap Nut
• Face the front end of the vehicle body.
• Slide a washer onto one of the front axles.
• Slide a round bushing, ring end first, onto the front axle.
• Slide a wheel (ribbed side first) onto the front axle.
• Slide a hubcap (indented side out) onto the front axle.
• Fit a .437 cap nut on the end of the front axle.
• Fit the cupped end of the cap nut assembly tool over
the cap nut and tap the end of the cap nut assembly
tool with a hammer to secure the cap nut on the end of
the axle.
• Repeat this procedure to assemble a washer, round
bushing, wheel, hubcap and cap nut to the other
front axle.
Wheel
Round
Bushing
Washer
Hubcap
Cap Nut
Assembly
Tool
Cap Nut
5
.437"
.437 Cap Nut
Ring
Side
Round Bushing