Filter
Top Products
EN31
Set to “ ”.
TBC Button
PLAYBACK
Features
COUNTER R/M Button
Rewind (
2
) Button
Fast-Forward (
3
) Button
Play/Pause (
4
/6) Button
Stop (5) Button
Tracking: Eliminates noise bars that appear on-screen
during playback. Factory-preset is Auto Tracking.
To activate Manual Tracking:
1)Press TRACKING for approx. 2 seconds. “MT” appears.
2)Rotate TRACKING so that the noise bars disappear.
●
To return to Auto Tracking, press TRACKING for approx.
2 seconds or set the Power Switch to “OFF” and then
” ” again. “AT” blinks. When Auto Tracking finishes,
the indication disappears.
●
When noise bars appear during playback, the
camcorder enters the Auto Tracking mode and “AT” is
displayed.
●
Manual Tracking may not work with tapes recorded on
other VCRs or camcorders.
TBC (Time Base Corrector): Removes jitter from
fluctuating video signals to deliver a stable picture even
with old tapes. Factory-preset: TBC is engaged.
To activate/release the TBC mode, press TBC during
playback for more than 1 second. When the TBC mode is
activated, “TBC” is displayed.
Counter Memory Function: Makes it easier to
locate a specific tape segment.
1)Press COUNTER R/M and hold for more than 1 second.
The counter resets to “0:00:00”.
2)Press COUNTER R/M for less than 1 second.
“M” appears.
3)After recording or playback, press 5, then
2
. The tape
automatically stops at or close to 0:00:00.
4)Press
4
/6 to start playback.
●
The counter memory functions in the Fast-Forward and
Rewind modes.
●
To disable the Counter Memory Function, press
COUNTER R/M for less than 1 second so that “M”
disappears.
TRACKING
Wheel
For other notes, ੬ pg. 35