JVC GR-FXM37 Automobile Electronics User Manual


 
18 EN
DANGER
The video light can become extremely hot. Do
not touch it either while in operation or soon
after turning it off, otherwise serious injury may
result.
Do not place the camcorder into the carrying
case immediately after using the video light,
since it remains extremely hot for some time.
When operating, keep a distance of about 30
cm between the video light and people or
objects.
Do not use near flammable or explosive
materials.
It is recommended that you consult your
nearest JVC dealer for replacing the video
light.
Video Light (GR-SXM47/SX22 only):
To
brighten the scene when natural lighting is too dim.
1) Set LIGHT OFF/AUTO/ON as required:
OFF : Turns off the light.
AUTO : Automatically turns on the light when the
camcorder senses insufficient lighting on
the subject.
ON : Always keeps the light on as long as the
camcorder is turned on.
The video light can only be used with the
camcorders power on.
It is recommended to set the white balance
(
pg. 29) to
when you use the video light.
When not using the video light, turn it off to save
battery power.
Even if the battery indicator
( )
does not blink
if the battery packs charge is low, the camcorder
may turn off automatically when you turn on the
video light, or when you start recording with the
video light turned on.
When LIGHT OFF/AUTO/ON is set to AUTO:
Depending on the lighting conditions, the video
light may keep turning on and off. In this case,
manually switch the light on or off using LIGHT
OFF/AUTO/ON.
While the Sports or High Speed Shutter
mode (
pg. 20) is engaged, the light is likely
to stay on.
While the Twilight mode (
pg. 20) is
engaged, the light will not activate.
RECORDING
Basic Features (cont.)
Set to or .
LIGHTOFF/AUTO/ON Switch
(GR-SXM47/SX22 only)