Filter
Top Products
Installation Instructions
OUO6050,0001473 –19–19OCT05–2/2
PC8721 –UN–23AUG05
2. Connect seat switch harness connector to seat switch.
This harness includes two sets of connectors, use only
the set of connectors that corresponds with the
vehicle’s seat switch. Disregard the unused set.
NOTE: Seat Switch is found on lower backside of the
seat.
3. Plug unused connectors in to each other for dust
protection
OUO6050,0001475 –19–19OCT05–1/1
Secure and Route all Harness
PC8873 –UN–22NOV05
In order to prevent interference with operator and cab
controls secure and route harnesses with the provided
adhesive clips.
1. Thoroughly clean surface with JD All-Purpose Cleaner
(TY25683) and dry completely before attaching
adhesive clips.
2. After removing protective film on the clips, press and
hold the clips to the surface for at least 30 seconds to
ensure proper adhesion.
3. Securely lock all harnesses into clips leaving enough
slack for the steering wheel to telescope.
PC20577 (22MAR06)
18
Installation Instructions
032206
PN=20