Filter
Top Products
Installation Instructions
OUO6050,0001294 –19–20OCT05–1/4
Harness Connection Location for Implement
Connectors
PC8730 –UN–19OCT05
A—AutoTrac Universal Connection Location for the
Implement Harness
OUO6050,0001294 –19–20OCT05–2/4
PC8780 –UN–18OCT05
A—2-pin connector
B—4-pin connector
C—Implement Connector
NOTE: FOR TRACTORS EQUIPPED WITH A TECU:
Implement connector can not be used as the
source of the 2-pin power on machines equipped
with a TECU. Kits PF80873 or PF80874 provide a
connection point for 2-pin power.
1. Locate and disconnect 2- and 4-pin connectors (A and
B) on implement connector (C).
OUO6050,0001294 –19–20OCT05–3/4
PC8781 –UN–18OCT05
2. Connect AutoTrac Universal harness to implement
connectors. Insert the connectors that were unplugged
to the remaining connectors on the ATU harness as
shown in photo.
PC20577 (22MAR06)
15
Installation Instructions
032206
PN=17
Continued on next page