Filter
Top Products
Operating the Engine
DPSG,CD03523,19 –19–09JUL99–2/4
CD30750 –UN–03SEP99
Air intake heater
Air intake heater is either a grid-type (A) for POWERTech
engines or a glow plug-type (B) for 300-Series engines
installed in the air intake channel.
CAUTION: NEVER use Ether Starting Fluid
when air intake heater is used to start the
engine.
Activate the heating element (preheater position) for
30 seconds maximum then start the engine.
DPSG,CD03523,19 –19–09JUL99–3/4
LX1017768 –UN–24OCT97
Coolant heater
Connect plug of coolant heater (A) to a power source (110
or 220 V).
At an ambient temperature of -15°C(5°F), the heating
process takes approximatively 2 hours. Extend heating
period if ambient temperature is lower.
DPSG,CD03523,19 –19–09JUL99–4/4
LX1017708 –UN–09OCT97
Fuel preheater
Fuel preheater (A) switches ON and OFF automatically in
relation to the ambient temperature.
15-2
112699
PN=39