Jensen IR30 Automobile Electronics User Manual


 
Installation Instructions
1. Open the locking cover on the rear side of the remote control.
2. Hold the remote control inside the steering wheel and guide the strap through and
under the locking cover.
3. Tighten the strap slightly and then press the perforations firmly into the matching
catches on the locking cover.
4. Close the locking cover and push it into the locked position.
NOTE: If the locking cover does not engage or the remote control does not fit firmly
enough on the steering wheel, please repeat steps 3-4.
PAGE 2
Step 1 Step 2 Step 3 Step 4