Filter
Top Products
CAUTION!
•
When installing the Integrated Power Module
cover, it is important to ensure the cover is prop-
erly positioned and fully latched. Failure to do so
may allow water to get into the Integrated Power
Module, and possibly result in an electrical system
failure.
•
When replacing a blown fuse, it is important to
use only a fuse having the correct amperage rating.
The use of a fuse with a rating other than indicated
may result in a dangerous electrical system over-
load. If a properly rated fuse continues to blow, it
indicates a problem in the circuit that must be
corrected.
REPLACEMENT LIGHT BULBS
LIGHT BULBS — Interior Bulb No.
Cargo Light .........................TL212–2
Overhead Console Light..............PLW214–2A
Reading Light .......................WL212–2
LIGHT BULBS — Exterior Bulb No.
Headlight..........................9008 H13
Front Park/Turn Signal Light .............3757AK
Front Side Marker Light....................168
Back-Up Light.........................3157K
Center High Mounted Stop Light
(CHMSL) ...................LED(serviced at an
authorized dealer)
Fog Light ..........................H109145
License Plate Light .......................168
Rear Tail/Stop.........................3157K
Rear Turn Signal Light..................3757AK
446 MAINTAINING YOUR VEHICLE