Jeep 2009 Automobile User Manual


 
Sky Slider Control
The Sky Slider switch is located between the sun visors
on the overhead console.
NOTE: The Sky Slider switch will operate when the
ignition switch is turned to the ON position.
Opening the Sky Slider
Using Automatic Mode
Press the switch rearward and release it within one-half
second and the Sky Slider will open from the front and
move automatically toward the rear of the vehicle.
Press the switch forward and release it within one-half
second and the Sky Slider will open from the rear and
move automatically toward the front of the vehicle.
NOTE:
During operation, any movement of the Sky Slider
switch will stop the Sky Slider roof.
To resume the operation from a partially open posi-
tion, press and release the switch a second time.
The Sky Slider will not open from the front and the
rear at the same time. The Sky Slider must close fully
before opening it from the opposite end.
Sky Slider Switch
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 177
3