Filter
Top Products
USB 2.0 to SATA/IDE Combo Adapter User’s Manual
Connecting to Computer
Connect one end of the USB cable to the adapter and the other to a free USB port
on the computer.
Driver Installation (For Windows 98SE Only)
The adapter is Plug-and-Play under Windows XP, 2000, ME and MAC OS. No need
to install a third party driver.
Windows 98SE users need to download the driver from the website. After the
download, double-click the setup file and the following message will appear. Click
OK and then connect the adapter to the USB port of the computer. If the hard drive
is not detected upon USB connection, reboot your computer.
Using the Hard drive
Now you are ready to use the attached hard drives as external USB 2.0 storage
device. (A brand new hard drive must be partitioned and formatted first. You can
use Windows Disk Management utility in Windows XP/2000 or other disk
management software to perform disk-related tasks. Please refer to your software
documentation for instructions.
Under Windows, the external hard drive(s) should be displayed in My Computer.
An USB device monitor icon will appear on the notification area of the taskbar.
* Drive name and letter vary accoring to your configuration.
4